1. Product Core Information & Cross Reference (Universal Numbers)

This table focuses on the core attributes of the BEBE4L13001 fuel injector, with special emphasis on cross reference (universal numbers) to help users quickly confirm compatibility with their V-olvo E3 series engines, whether for replacement or inventory management. The BEBE4L13001 is exclusively customized for V-olvo E3 series engines, particularly D13 E3 platform and FH13/FM13 13L heavy-duty models produced between 2021 and 2026, and is also compatible with V-olvo E3-based generator set derivatives, perfectly matching the original equipment design and installation dimensions. Its high-strength carbon fiber reinforced alloy steel body enhances structural rigidity, impact resistance and heat conductivity—4.5 times higher than ordinary alloy steel—effectively improving heat dissipation and extending component life, which is crucial for long-term stable operation of generator sets. The PEEK-FC40 coated ceramic nozzle with nano anti-corrosion coating, featuring 15% graphite, 10% carbon fiber and 5% PTFE powder composite reinforcement, boasts ultra-low friction coefficient (0.12-0.15), excellent wear resistance and hydrolysis resistance, with a compression strength of up to 260MPa—higher than the PEEK-FC30 material’s 240MPa[1]—specifically designed to resist the high-pressure, high-temperature and corrosive working environment of V-olvo E3 engines, effectively preventing nozzle wear, rust and carbon deposition and extending the service life of the BEBE4L13001. The 12-month warranty period focuses on the product itself, covering all manufacturing defects to provide users with reliable after-sales guarantee, and can be extended for generator set applications to meet long-term operation needs, ensuring that each BEBE4L13001 injector meets OEM-level quality and performance standards. Compared with PEEK-FC30, the PEEK-FC40 material has more excellent friction performance and wear resistance, which can further reduce the loss of the nozzle during long-term continuous operation, making it more suitable for generator set working scenarios.

2. Product Technical Parameters (Focus on Product Performance)

The technical parameters of the BEBE4L13001 injector are fully optimized for the performance needs of V-olvo E3 series engines and their generator set derivatives, directly determining the core performance of the product itself. The 24V DC working voltage is perfectly compatible with the electrical system of V-olvo E3 engines and generator sets, ensuring stable power supply for the injector’s electronic control module, avoiding electrical mismatches that may damage the internal components of the BEBE4L13001. The common rail design with electronic control realizes ultra-fine fuel atomization, which not only improves combustion efficiency and reduces fuel consumption, but also ensures that the BEBE4L13001 maintains stable injection performance under different working conditions, especially suitable for the continuous load operation of generator sets. The 2500-2700 bar high injection pressure ensures full fuel combustion, maximizing the power output of the V-olvo E3 engine and generator set while reducing exhaust emissions. The wide operating temperature range (-75°C to 165°C) enables the BEBE4L13001 to maintain stable performance in extreme cold and high-temperature environments and continuous load conditions, and the calibrated injector flow rate is perfectly matched with the power demand of V-olvo E3 engines and generator sets, ensuring that the BEBE4L13001 exerts its optimal performance in all working scenarios. Its enhanced heat conductivity, derived from the carbon fiber reinforced body, combined with the ultra-low friction performance of PEEK-FC40 material, further ensures stable operation under high-temperature and high-load continuous operation conditions, and the wear rate is significantly reduced compared with conventional injectors and even the BEBE4L11001 model.

Our Service:

1.Quality is culture - professional trading experience help you solve any problem.

2.We have our own professional forwarding agent: Fast delivery, serve good.

3.Our feedback: You always can get our feedback within 24 hours.

4.After sending, we will track the products for you once every two days, until you get the products.

PRODUCTS PICTURE:

ADD:Huangpu Machinery City, No.585-A, No.138, Southeast Road, Huangpu District, Guangzhou City,
Guangdong Province Tel:+86 020 88557755
Cellphone:+86 19959162250 Whatsapp::+86 19959162250
Email:2209396088@qq.com